The Spooky2 Plasma Tube is a phanotron coil similar to those used by Dr. Rife for his 100% successful cancer clinical trials. It can be connected to any SSQ-2F generator and transmit frequencies through its high power contact output.
Compatible with all frequency generators, it can be used for an array of purposes such as scalar energy healing, mortal oscillator rates and Schumann resonance frequencies.
Safety
When using a Spooky2 plasma tube, it is imperative that users adhere to all safety features. Always separate high voltage wires from your generator from those of the plasma tube to prevent contact between the two and reduce electromagnetic interference. Furthermore, using an appropriate frequency for every application as different pathogens require different frequencies.
No matter if you’re targeting one area or the whole body, the Spooky2 Phantomotron Tube can help! Designed to direct energy directly where it is most needed (whether that means tumor cells or even just on top of your head), or as part of an entire-body treatment simply by placing it over yourself and selecting a frequency set – the Spooky2 is a versatile tool with endless applications!
Spooky2 plasma tubes offer another useful feature in imprinting frequencies into water. Doing this is simple enough by simply placing the tube on a flat surface and pouring a glass of water onto it – then simply enjoying as a beverage or using for healing purposes!
Staying hydrated when working with a spooky2 plasma tube can increase its effectiveness and hasten recovery. At least two glasses of water should be consumed per session when treating serious conditions with a spooky2 plasma tube, and even more should be consumed when working on severe ones.
Spooky2 Boost goes far beyond previous versions of its software in terms of advanced functions. Users can create custom frequency databases readable by Spooky2, and loaded as program presets. Furthermore, users can adjust amplitude and phase for generated frequencies, and also detect MORs or “Yes/No” body responses using this version of Spooky2.
Spooky2 can perform both body and DNA scanning to identify frequency matching resonances with specific pathogens, recording hits. Accessories like plasma tubes and DNA remote allow direct frequency application on body or skin areas directly while its software can generate and apply tens pads for disorders like Lyme disease and Morgellons.
Operation
Spooky2 offers an innovative feature known as carrier sweep that can be set to start low or high and follow either Out 1 or Out 2, independently. This enables a range of frequencies such as audio, RF and DC electrical signals to reach the plasma tube for transmission directly. In combination with other frequencies this can also create treatment programs tailored specifically towards an issue.
Spooky2 offers an extensive array of frequencies designed for scanning both body and DNA, and saving scans as programs to be later applied directly. Accessories like plasma tubes and DNA remotes allow direct application. In addition, biofeedback scanners and DNA remotes address specific issues like Morgellons disease.
Use of the Spooky2 Phanotron system is relatively straightforward. Since both generator and plasma tube are not directly linked together, no risk of accidental high voltage exposure exists during operation. When operating the generator must remain at least several inches from its plasma tube.
The plasma tube is connected to its generator via a cable featuring high voltage plugs and thick silicon insulation, plugged into its high voltage socket on the back of Spooky2 central, then routed along another end toward its Plasma Ball connector and finally to its PEMF coil’s auxiliary power input on its front face.
The system can be tailored to operate at almost any amplitude from milliamps to 500 watts peak, giving it maximum versatility in using various plasma tube types and sizes as well as any frequency generator or amplitude-controlled signal source. When combined, using frequency generator and plasma tube together can be an extremely effective tool for healing the body – electromagnetic fields produced by plasma tubes can be modulated for specific effects like decreasing inflammation or hastening cell repair/regeneration while using Schuman frequencies modulates plasma field modulation to lower stress levels even further.
Maintenance
For optimal system performance, it’s vitally important that the correct wires and frequencies are used, without plugging any unnecessary ones into RF generators or plasma tube ports – as doing so may damage or void your warranty. Also make sure only using software designed specifically for your specific system such as Spooky2, as well as following all recommended operating procedures in its guide; such as keeping frequency generators and plasma tube well apart at all times.
Use plasma tubes and RF generators in an open space away from metal, glass or any electrical devices that emit interference, including any metal objects like tools. Also it’s advisable to cover any exposed spooky2 cables with foil so as to reduce electromagnetic fields emitted by them and shield from RFI/EMI interference.
Before using your Spooky2 rife system, ensure all generators and tubes have been fully charged and tested – this is especially important if using new tubes for each use.
Once your generators and plasma tube are operating properly, the next step should be loading programs into your Spooky2 system through its Presets menu.
If you plan to run the DB cancer protocol, be aware of two things. First, the program takes more than eight hours to run; secondly, plasma tubes require significant power in order to operate effectively, which will drastically decrease its Estimated Total Run Time. Therefore, running a detox maintenance program in parallel will enable you to complete it within an acceptable timeframe.
When loading a program, be sure to click on the “Alternate Waveform” box to select an appropriate frequency waveform for your machine. If unsure, contact your spooky2 distributor or visit their website for help in selecting an ideal waveform. In addition, it is advisable that all settings, frequency sets, and waveforms be easily stored within a custom database for quick and convenient access.
Applications
The Spooky2 Plasma Phanotron tube can be used with a frequency generator to effectively destroy parasitic microorganisms in your body. Emitting electromagnetic waves deep within, it targets and eliminates pathogens resistant to traditional cleansing methods while also helping restore energy balance within your system. Constructed of tough, durable borosilicate glass for maximum performance, the device works with most frequency generators although those producing pulsating waveforms are recommended.
The device is powered by AC current that runs through a transparent tube filled with gas such as helium. Helium can be safely ionized by electric discharge to create plasma, an eighth matter state that contains free electrons that transmit healing frequencies into the body.
This system utilizes advanced features that expand Rife’s technology and provide additional healing abilities, including scanning body and DNA with frequency scanner, recording biofeedback and using preset programs such as Morgellons-specific frequency lists which are constantly being updated; users may also create their own programs tailored specifically for them.
Once a program has been loaded, users can launch it by pressing the “Play” button. The program will start applying frequencies to both the plasma Phanotron tube and body to reduce parasites while balancing energy within it. Some frequencies in the Radio Frequency part of the spectrum may cause slight heating of cells but these pulsed waves won’t cause discomfort to anyone using the machine.
When creating a custom program, users can decide whether or not to include frequencies from the database and add an informative description that will appear during searches. When choosing to include frequencies from the database, an amplitude voltage peak-to-peak output setting allows the user to control output intensity; and gating can be set either 1 or 0. If set to 0, outputs occur every 0.5 seconds.
