Spooky2 offers various ways to apply frequencies, including contact mode for use with silver gloves or socks, bands, internal electrodes and hand cylinders; plasma mode; biofeedback scan with Spooky Pulse accessory; and plasma mode with Spooky Pulse accessory.
This software includes four built-in databases – DNA, Base Pairs, Molecular Weight and Main – plus custom ones you add yourself. In addition, there are other features in the program as well.
What is Spooky2?
Spooky2 software is at the core of our effective Rife system, controlling up to 126 generators simultaneously and independently. The software offers one of the largest Rife frequency databases available as well as various treatment modes and protocols as well as biofeedback scanning system built-in biofeedback scanning system built into this Rife device. Furthermore, users are also able to control plasma devices such as Dr Hulda Clark Zappers or Cold Lasers for home insect pest or mould remediation using our Rife system.
The software is easy to use and comes with a detailed manual that explains all transmission modes and hardware available as well as teaching lessons on how to properly work with the software. Furthermore, this guide offers many tips and tricks that will ensure maximum usage from your system.
Spooky2 installation includes not only its main program but also a complete frequency set that will run on the UDB1108S-generator. It can be freely downloaded from the Spooky2 download page; simply unzip it after download and copy into your directory for use by Spooky2. Note that files developed through this site are produced within an isolated environment that is completely separate from any internet access and therefore guaranteed virus-free despite sometimes false-positive reports from Windows 10 and Bit Defender’s virus detection methods; they should therefore always be treated as 100% virus-free!
After opening Spooky2 software, connect your GeneratorX Pro via its USB cable to your computer and select your Shell Preset of choice before choosing to download up to 30 programs at a time onto one GeneratorX Pro.
Once the programs have been uploaded, close Spooky2 and disconnect your GeneratorX from your computer. When done, connect Spooky2 Boost to GeneratorX and launch its remote; after some moments the LEDs on its surface will light up sequentially to indicate which programs were successfully downloaded to your GeneratorX Pro.
Spooky2 features several enhancements that enhance its software, including an Out 1 frequency slider for adjustments during programs. If one generator’s output becomes unstable, its channel button will display with an “X” to avoid confusion when users check its display.
Downloading Spooky2
Spooky2 is a software program that enables you to run Rife frequencies on your computer, with access to the world’s largest database of frequencies for pathogens. Furthermore, it features the capability of creating your own programs and adding them directly into its databases. Available for Windows and Linux systems alike and freely downloadable from its website, Spooky2 comes equipped with installer software, five full databases, as well as PDF manual. Guaranteed virus-free by its development environment that isolates it completely from internet exposure while 100% virus protection algorithm may occasionally report false-positives – something normal due to flawed virus detection algorithms.
Spooky2 software operates in two modes, Remote and Contact. For contact mode, acupuncture points (meridians) must be covered with Spooky2 Cold Laser Twin or wrist units placed directly on them for effective scanning; in remote mode a pair of TENS pads or Stainless Hand Cylinders connected to generator can be connected and the software triggered to scan body frequencies and transmit frequencies accordingly. Spooky2 also features its Spooky2 Silver Kit accessory to make high quality colloidal silver solutions.
Spooky2 software can be easily downloaded for free through this link and tested without the use of hardware. It will run in its special “test mode”, using virtual generators instead of real ones; although no tangible benefits will accrue during your evaluation of this virtual generator system. But you will gain insight into its operation while experiencing how it looks and operates!
Once you’ve downloaded and installed Spooky2, follow the directions in the Spooky2 Quick Guide for installation. When done, connect your generator directly to your computer using USB cables.
Once your generator is connected to your computer, launch Spooky2 software and choose one of its preloaded presets such as Terrain (R)-BY. On the Control tab, check “Allow Generator Overwrites,” before selecting one of its buttons to run your chosen program – when done, its LEDs will illuminate.
Step two of Spooky2 biofeedback scanning should involve using its Reverse Lookup function, to conduct a biofeedback scan against the pathogen that you have selected and search the database for associated frequencies.
Installing Spooky2
Spooky2 provides access to one of the world’s largest Rife frequency databases and it’s completely free. Installation is quick and painless on any Windows computer; minimum hardware requirements apply and the software is virus-free and malware/spyware free – best to check back often as its database continues expanding!
Spooky2 comes equipped with a detailed manual and PDF documents to assist in its use, as well as an exhaustive list of frequently asked questions (FAQs). Should any issues arise, our support team can offer help directly.
Your generator is connected to your computer through USB and can be activated prior to opening Spooky2. Select from Remote, Plasma and Contact modes before selecting one in Preset mode; to access factory presets select them here or create your own programs by choosing shell presets and adding frequencies – plus healing or killing modes are available as options too!
Once the program has loaded, you can connect a cold laser twin or wrist wand to its generator and begin treating yourself with its frequencies. Use it on your nose, ears, navel, acupuncture points (meridians), skin or aura and deeper layers of tissue for treatment; alternatively use it for detoxifying water or imprinting frequencies onto food/supplements for maximum effect.
If you use the GX tens scan, Spooky2 software will detect any stress event that alters the pulse rate of your heart. As the scan sweep continues, Spooky2 correlates each stress event to its respective frequency before compiling them into an easily retrievable program that you can save and use to address identified issues.
If you are having problems with your Spooky2 system, swap out generators and USB cables; reinstall GenX drivers in Utils; rescan devices if that does not help; if the issue remains then it could be an internal hardware problem with either generator or PC.
Using Spooky2
Spooky2 is an advanced Rife system. It can be used in multiple ways to address health issues as well as eliminate household insects and mold, including eliminating them using biofeedback techniques. Furthermore, Spooky2 software runs in Test mode without its respective generator – we advise doing this prior to purchasing one!
The software features the world’s largest database of pathogens and conditions it can treat, including Big C protocol, Morgellons protocol and Lyme protocols. Furthermore, it can even serve as a PEMF coil or even Dr Hulda Clark Zapper!
Spooky2 XM Generators can be connected to computers using a BNC filter cable that links outgoing output 1 from the generator with the Input port of Spooky2 Central and outgoing output 2 with Modulation port of Spooky2. Once powered on with 5V power adapter, generators may either be placed directly onto skin for remote treatment, or attached directly onto contact accessories like cold laser twin and wrist units for direct body contact – these being amongst the most frequently used accessories.
To use factory presets, simply navigate to the Presets tab in the software and choose one. For shell mode with custom programs, navigate to the Control tab, tick Allow Generator Overwrites and open a generator button before selecting your program in GeneratorX Boost or Remote’s LED lights will light up when running your program; once finished simply switch it off by switching off frequencies in Programs tab Boost/Remote device then leave on skin without unplugging it as treatment continues uninterrupted – also great for chronic issues! Finally there is also a Loop program available which continuously runs frequencies – great for chronic issues!
