Spooky2 Rife systems use frequencies to treat various health conditions. Their generator x driver forms the core of Spooky2, making its functionality key in treating such ailments with frequency treatments.
Spooky2‘s main menu provides a Frequency Set Preset button which saves and restores frequency sets, waveforms, and settings. In addition, USB capture log is provided as well as frequency blacklist control.
1. Installation
Spooky2 is a free software program that connects directly to an XM generator via USB, providing an intuitive user interface for configuring it. Once installed, it automatically detects connected generators and displays their respective frequencies – including your custom frequencies if applicable – making configuration effortless. Once your list is completed and ready for scanning; scanner supports various device types including plasma, contact, cold laser and PEMF devices.
Spooky2-XM Generator with Power Adapter and USB Cable; BNC/Alligator Cable and BNC Booster are included with each generator, along with 2 Spooky2 Silver Rods per Glass/Ceramic Container; one Distilled Water Only Magnetic Stirrer is also provided to stirr distilled water samples.
After connecting the Spooky2 XM via USB, make sure that all generators are activated and screen saver disabled before launching Spooky2 software and selecting Presets – once your settings have been completed click Advanced View tab to see more options for GX setup.
Enable System Sounds to hear audio alerts from Spooky2 during its scan. Doing this allows it to alert you if something needs your attention during its process and ensure no interruption occurs while an examination is in progress. Be mindful not to interrupt an ongoing scan!
If you’re having issues scanning DNA samples, try reinstalling GenX drivers by going into Utils and selecting “Install GenX Drivers.” This will restore all settings within GenX so it can recognize and scan your device properly – hopefully solving any problems related to scanning with GenX scanner.
Restarting and rescanning generators may help determine whether the problem lies with hardware or software; you could also switch out generators and USB cables to see if one or the other may have caused issues.
The Spooky2 XM Generator is the most powerful Rife generator on the market, offering two function generators with two outputs and full biofeedback functionality. It includes everything needed to produce premium nanoparticle Colloidal Silver at much more reasonable costs than commercially available products.
2. Setup
Once you have downloaded and connected a generator(s) to your computer, it is time to set it up. First, connect them via USB cable. Next, launch Spooky2 software and choose one of its presets from Presets tab; for example, Detox offers frequencies that may help with various health conditions.
As soon as a preset has been selected, its LEDs on the generator will begin lighting up. Once loaded, click the scan generator button and allow your software to begin scanning for stressors such as variations in output voltage. As scanning progresses, frequencies that cause these stressors are identified and associated with them – when finished scanning is complete, these frequencies will be combined into an effective program to treat your issue.
Use the Full System Scan preset to locate all pathogenic organisms resonating between 76,000Hz and 880,000Hz – this range typically associated with illnesses and conditions. It is especially helpful for newcomers to the Spooky2 Rife System.
As part of setting up Spooky2, it is crucial that your computer does not go to sleep or hibernate while generators are connected. Sleep will cause transmission to stop and may lock them into emitting the same frequency indefinitely; to prevent this from happening, disable Windows Sleep Settings or install a screen saver compatible with Spooky2.
If you’re experiencing issues connecting generators to your computer, try rebooting it and rescanning devices under Utils. If this doesn’t solve it, swap out generators and USB cables between generators to see if there’s an issue related to either device or port – otherwise reach out to Spooky2 Support team for assistance.
3. Scan
Install the Spooky2 software onto your computer and connect your generator. As soon as the software detects your generator, the Preset Tab will appear allowing you to select presets or programs from within it. Furthermore, custom frequency sets can also be created and saved onto your computer for later use – an invaluable feature if treating multiple conditions with Rife frequencies is part of your treatment regimen.
As soon as your presets or programs have been loaded, click Scan to initiate your biofeedback scan. It should take only a few minutes and will display results in a new window; once complete, select frequencies appropriate for your condition by clicking Save before saving them permanently by clicking Done.
If you experience issues while scanning, double check that all generators and USB cables are securely attached. Swapping generators or cables might help determine whether faulty connections may be the issue; otherwise reinstalling drivers under Utils could provide another avenue of resolution.
As Spooky2 can send out pulsed electrical energy through its generator and device connection, this could interfere with electronics in your pacemaker and could pose serious health risks unless used in Remote Mode. You can find more information regarding this on their website.
To prevent this, first run the Terrain Detox Protocol in Spooky2 to make your body more receptive to Rife frequencies, followed by any of the Rife protocols built into Spooky2 tailored specifically towards your condition – Big C Protocol, Morgellons and Lyme Protocol, among others. When this has been completed, custom programs or the software’s reprogramming options allow you to generate your own set of frequencies that can then be stored on generator for standalone operation if desired.
4. Run
The Spooky2 Generator x Driver is an advanced frequency healing system that enables you to produce premium nanoparticle colloidal silver at home and heal yourself of various symptoms and ailments. This device has also been shown to improve sleep quality; thus offering another powerful tool in helping return you back to your optimal performance levels.
Spooky2 can be downloaded from its official website and is compatible with Windows XP, Vista, 7/8 and 8.1 as well as most modern Intel processors. Installation takes less than 10 minutes and it is highly recommended to temporarily disable antivirus software during setup – in addition, at least 1 gigabyte of RAM and 200 gigabyte hard drives are required to complete installation successfully.
Once the software and generator are connected, frequency treatments can begin immediately. Simply select one of the factory presets, enter your DNA sample into Spooky2, and click G1 or G2. Spooky2 will quickly and effectively match up your symptoms with frequencies likely to treat them; results should appear within days!
Spooky2 stands out from its predecessors with many distinctive features that make it more versatile and powerful, such as being able to capture frequencies via USB connection, store/restore frequency sets/waveforms/settings as well as offer intuitive user navigation – including its Frequency Blacklist function which prevents transmissions of specific frequencies again.
Spooky2 also includes an amplitude and phase control function, enabling users to create complex waveforms with dynamic waveshaping capabilities, while selecting their preferred frequency. Furthermore, you have the capability of altering duration for specific frequencies.
Spooky2 can help diagnose an array of conditions, from low energy levels and chronic pain, to cancer diagnosis and treatment plans tailored specifically for your DNA. As it has been created to benefit humanity as a whole, you are encouraged to share it with everyone who comes your way.
