Banner Image

Information Wellness Blog

Detailed Reviews and Guides about energy and informational health and wellness

blank

Spooky2 User Manual

Spooky2 offers an easier and quicker scanning experience by performing only a single pass without reinspection of frequencies, significantly cutting scan times for most users.

New features in Channel Control panels include global controls for amplitude wobbles that can be adjusted using toggle buttons and an audio alert when software reports errors.

Basics

Spooky2 software serves as the central interface for generators supporting Remote, Contact, Plasma, and Cold Laser modalities, enabling precise frequency applications. Designed for ease-of-use with an intuitive menu system for session management and preset navigation, Spooky2 also monitors treatment progress as well as generator configurations to make it an invaluable tool for both newcomers and advanced users alike.

Rejuvenate your whole body & balance your health without medications - now remotely!

Spooky2 allows users to store various settings for future use, including their default language and folder, desktop shortcuts that open Spooky2 directly from Windows taskbar or quick launch menu, custom frequency sets with carrier waveforms (to target specific pathogens or diseases) that they create as programs, frequency rewind feature for easily going back through previous sessions, frequency blacklisting feature for troubleshooting purposes, frequency blacklisting capabilities as well as HRV tolerance controls – as well as other useful features like USB communication log, frequency blacklisting capabilities as well as HRV tolerance controls to troubleshoot.

The Settings tab of Spooky2 allows for customization by setting basic preferences such as font size and style to tailor the user interface. There are also a number of utilities, such as an audio player built-in to each port and an automatic frequency counter which displays current transmission frequency being transmitted across all of them. In addition, Spooky2 can be configured to copy settings from Out 1 to Out 2, making working with dual generators much simpler.

An additional handy feature of the H-Bomb and sine waves is their ability to simultaneously perform a full spectrum sweep, enabling better detection of pathogens. Furthermore, the amplitude of their composite waveform can be adjusted for fine-tuning transmission of their transmitted signal; either using harmonics from H-Bomb waves and sine waves as harmonic sources or two different sources can create this composite waveform.

blank

Presets

Presets are sets of frequencies designed to perform specific functions, like healing, detoxing or killing. Spooky2 already comes equipped with many presets available online – you can download additional ones by extracting zip archives downloaded from the internet – then placing it into the Spooky2 program folder (in Windows this would typically be C:Spooky2Preset CollectionsUser).

Experience different frequencies to see their intended results. Furthermore, use the program settings to customize and save presets of your own creation – you’ll be able to access these anytime later through user collection! You’ll have control of many aspects affecting how the program runs each time, such as USB Capture Log settings; Frequency Blacklist controls that block transmission of certain frequencies; HRV Tolerance tolerance settings; database load list updates and font size/color changes etc.

Rife Modulation is another feature available through this program, which combines Royal Rife’s discoveries with Nikola Tesla’s scalar energy for optimal healing effects. This allows users to combine effective frequencies from Royal Rife with Tesla’s energy and eliminate pathogens more effectively; also healing any damage they cause due to pathogens.

Spooky2 can deliver these frequencies directly into your body through two methods – either contact therapy using metal handlebars or TENS pads placed directly onto the skin, or remote therapy using quantum entanglement principles. With remote therapy, only a small DNA sample needs to remain energetically linked with the device allowing treatment no matter where you may be located.

Programs

Spooky2 software serves as an interface for Rife Generators, offering users with a user-friendly menu and tabs for session management and preset navigation. It supports remote plasma contact laser cold laser frequency applications for precise frequency customization while supporting remote plasma contact laser frequency applications for easy frequency use by beginners or experts alike. Newcomers to frequency applications will quickly be familiarized with Spooky2, while advanced users will appreciate its deep programmability and customization features.

The Spooky2 setup menu allows you to tailor the software according to your own specifications, including selecting its default language and folder location as well as creating desktop shortcuts for quick launch times. Furthermore, this section also lets you setup an internet download system for custom frequencies and resources.

Once your initial setup is complete, you can begin using spooky2 rife systems. There are numerous programs to choose from that range from basic detoxifications to more specific conditions such as cancer or morgellons syndrome. Some require long treatment cycles but these cycles can be stopped or resumed whenever necessary – these features make rife particularly suitable for Morgellons treatments as well as others that require extended duration such as cancer protocols.

Carrier sweep programs can be an extremely effective means of detecting and eliminating pathogens in the body, whether through using plasma tubes in contact mode for deeper penetration, or when working with parasites and other microscopic organisms that may be difficult to reach through other means.

When using Spooky2 to run a system scan, a progress bar and indicator above the Waveform Display indicate whether or not Spooky2 has found any generators. If the indicator turns green, that means Spooky2 successfully discovered some generators; otherwise if it turns red it means Spooky2 failed to identify any, prompting further checks such as whether USB ports have been properly configured for its use and drivers installed correctly.

Control

Spooky2 offers numerous settings and customizations to create the ideal experience. Use the Preset Manager to build frequency sets and waveforms from scratch or select one from our preloaded selections. Furthermore, its unique Pause/Resume function enables you to resume at exactly where it was interrupted – perfect for programs such as Morgellons/Cancer protocols which require long treatment cycles.

Spooky2 software supports multiple languages and automatically adjusts screen sizes as users switch screens. It can be updated online and is compatible with Windows XP, 7, 8, 10 and Windows Server 2012.

Multi-generator users will appreciate how this program enables you to control each output separately using channel gating on each generator, giving them greater flexibility in creating their own program setup and experiment with different frequencies without switching back and forth between generators.

Another new feature is the capability of conducting biofeedback scans. Simply connect a Spooky Remote (or other frequency emitting device) to output 1 of your Spooky2 Scalar Transmitter and to a computer; Spooky2 will track changes in its scalar field and record this as biofeedback charts.

Spooky2 now makes it easier than ever to save and restore all program presets – such as user and custom waveforms, frequency sets, and other settings – including user and custom waveforms, frequency sets, Carrier Sweep mode frequency modulation and saving personal settings as default for future sessions; it even supports CSV file format for easy frequency set exporting/importing!

System

Spooky2 offers access to an extensive array of frequencies that can be used for various purposes, from killing pathogens and detoxifying the body to increasing energy, improving health, healing and more. Frequency transmissions are accomplished using cutting-edge scalar technology – taking Rife Modulation technology one step further in terms of sophistication.

The Settings tab of your program enables you to make adjustments that will have an effect on its functioning each time it runs. Here, you can make modifications to aspects such as its USB Capture Log (for recording activities on generators), Frequency Blacklist controls to prevent transmission of certain frequencies, HRV Tolerance control lists as well as font size and color settings.

This tab can also be used to set the default language and folder where all data will be stored, as well as configure test mode without actual generator connections if you aren’t quite ready to connect your generators just yet. Furthermore, these settings can be saved as frequency set or carrier sweep programs so they are automatically loaded each time the program launches.

As soon as a scanner is in action, the Pause Button allows you to halt its progress and resume it later when convenient. Every time you press this button a blue bar appears at the top of your window as an indication of how long is needed to complete its sequence.

When selecting a computer to use with Spooky2, take into account its screen size and resolution as the software contains many lines of text that could be difficult to read on smaller displays. Furthermore, be sure to choose a power supply which provides adequate electrical current so as to fully run Spooky2 along with any selected generator(s).

Share:FacebookTwitterLinkedin

Comments are closed.

SPOOKY2 PORTABLE ESSENTIAL RIFE GENERATOR KIT