D461 Manual Fire Alarm Box
New RADIONICS 1358 Key For Fire Alarm Panel and Pull Stations
The D461 manual fire alarm initiating device can be easily integrated with all Radionics control/communicators via its latching pull down lever that requires a key to reset. UL listed, it meets both occupancy and residence fire alarm requirements.
Connect a 6.5 VAC, 40 VA transformer as the primary power supply and connect a 12V 7Ah rechargeable lead acid battery to its positive (+) terminal for secondary power delivery, producing up to 2 A at 10.0 VDC to 13.9 VDC as alarm output signal.
Take note of the D136 plug-in relay for output at terminal 7. A circuit breaker protects it against shorts on common input and output connections, safeguarding against any short circuiting that might occur between these elements.
An event triggered by activating any point within a system logs it and sends it directly to the command center. If it is a supervised sensor loop, system centers receive a PARAM FAIL report when activated; otherwise if non-supervised panel debounces counter for 10 seconds when first powered up with default Debounce Count of 2.
The D8125 POPEX module allows you to print events directly from a panel log on a parallel printer locally, making your job simpler. UL certified for use within enclosures containing D7212 modules, referring to system charts and manuals can help determine which modules will best meet your application.
D462 Addressable Pull Station
The D462 Addressable Manual Station enables occupants of buildings to initiate alarms using a single action latching lever, making this addressable fire alarm device ideal for installations at stairways, lobbies, and building exits. Utilizing Bosch FMM-462 POPIT module connected to data expansion loop of control panel polled for open, short circuit, or ground fault faults as well as its low profile design with rounded edges perfect for design applications; all in accordance with NFPA 72, Local Codes, and Authority having Jurisdiction.
