A comprehensive guide to using spooky2. Covers setting up the program, scanning with the generator and biofeedback.
Spooky2 includes a well-developed biofeedback system for finding the correct frequencies to target pathogens and help the body heal itself. It also has a strong Rife-based knowledgebase and active user support forums.
Getting Started
Spooky2 is the world’s most advanced Rife software with many new features and preset collections. It is a powerful tool for any level of practitioner, offering maximum depth and flexibility with an easy-to-use interface.
To begin, you will need a generator with a transmitter and receiver attached to it, a link cable between them, and a computer with Spooky2 running on it. You can use water or substances to imprint on the transmitter, or transfer molecular information with the receiver. The scalar energy flows through both devices and is felt by the person holding them. It is best to avoid contact with metals.
The first step is to configure your generator. This includes setting the frequency sets and default frequencies you wish to apply to your generators. The set name should be your initials or a numeral, or something else of interest to you. You can enter a brief description of the set to help you find it later.
You will also need to set the amplitude (voltage peak-to-peak) of your outputs. You can choose between 0 and 100. A negative amplitude will reduce the available power to the generator.
In the next tab you will need to set up the number of input channels for your generator(s). You can select between two and four, depending on how many pads you have and how much amplitude is required. This allows you to run different frequencies at the same time.
The final tab is for setting your preferences. This includes a variety of settings like the screen display, run scheduling and gating. You can also save a list of your favorite frequencies for quick reference.
Once your preferences are set, click the Start button and Spooky2 will begin scanning for your generator(s). The scan will take about seven minutes to complete. You can monitor the progress in the Scanning Status window. When the scan is finished, click the Stop button. When the program has stopped, you can connect your Spooky Pulse and click the Sync button.
If you are using a new spooky generator, you may experience Herx reactions after the first few sessions. This is a natural and normal response to the healing scalar energy being transmitted by your generator. To help alleviate this, it is recommended that you follow the Terrain Detox Protocol before starting any treatment protocols.
Configuration
The first thing you will want to do after installing spooky2 is set it up. Once you have done this, it is ready to run. There are a few options that you will need to change before you can use it, however. First, you will need to set the frequency tolerance. This is how much you are willing to allow spooky2 to go off the edge with its search. The higher the number you choose, the more aggressive it will be.
You will also need to choose a mode for your generator. There are three choices available: plasma, contact, and remote. Plasma mode is the quickest and most powerful rife machine. Contact mode is a little slower, but still very effective. Remote mode is the most convenient, but doesn’t have as much power as the other two modes.
Once you have decided which mode to use, you will need to select the frequencies that you would like to use. To do this, click on the arrows to the left of the generator. This will bring up a window with a list of all the frequencies available to it. Select the ones that you would like to use by clicking on them.
After selecting the frequencies, you will need to decide whether or not to use any filters. These are optional, but can be very useful if you want to limit the number of frequencies that are transmitted to your generator.
The last option you will need to configure is the number of retries. This is how many times spooky2 will attempt to transmit a frequency before giving up and trying another one. You can increase this if you notice that the program is not getting through to your generator.
spooky2 also has several additional features that you can configure. You can turn on and off the pause function, toggle the autostart feature, and you can modify the length of time that the program will be running before it stops and restarts.
You can also configure the spooky2 software to skip duplicate frequencies in its search. This is a very helpful feature because it saves you the time and effort of searching for the same frequency multiple times. This option can be found in the menu under Preferences.
Scan Results
When you scan a sample with the Sample Digitizer or the GeneratorX, there is a list of frequencies that show up. These frequencies can be saved in a BFB program that you can run on your scalar unit. To do this, select scalar shell preset in the software, click on control tab and check overwrite box and choose your generator number. Thank you! — Spooky2 User. (Spooky2 Remote, GeneratorX, Replacement Slides, Sample Digitizer, Hand Cylinders)
Video duration: 3:25.